17th post

The formula for the volume of disks is S (top)^2 - (bottom)^2 dx

The formula for the area of washers is S (top) - (bottom)

The steps are:
1. Draw the graphs of the equations
2. Subtract top graph's equation by the bottom graph's equation(in disks each equation would be squared)
3. Set equations equal and solve for x to find bounds
4. Plug in the bounds and the outcome of step 2
5. Integrate

volume by disks:

the formula is pi times the integral of the [function given] squared times dx. so just solve it by taking the integral of it and then pluging in the numbers they give you. just like before you'll have two numbers so whatever the answer is for the top one will be first and then you subtract the answer you get for the bottom one. then graph

volume by washers:

the formla is pie times the integral of the [top function] squared minus the [bottom function] squared times dx. so to do this, if you don't have the in between number you have to set the functions equal, but if you do, then it's worked the same way as above. square the formula's that were given and simplify. then take the integral of it and plug in the numbers they give you or you found by setting the formulas equal to each other and then solve like any other one by subracting them. then graph.

LRAM is left hand approximation and the formula is:
delta x [f(a) + f( delta x +a) .... + f( delta x - b)]

Say you are asked to calculate the left Riemann Sum for -4x -5 on the interval [-3, -1] divided into 2 subintervals.

delta x would equal: -1+3 /2 = 2/2 = 1
1[ f(-3) + f(-3 +1)]
1[ f( -3) + f(-2)]
then plug into your equation

RRAM is right hand approximation and the formula is:
delta x [ f(a + delta x) + .... + f(b)]
so using the same example:
1[ f( -2) + f(-1)] and then plug into your equation

MRAM is to calculate the middle and the formula is:
delta x [ f(mid) + f(mid) + .... ]
To find midpoints, you would add the two numbers together then divide by two
In this problem the numbers would be: -3 , -2, -1
-3 + -2/ 2 = -5/2 and -2 + -1 / 2 = -3/2
so 1[f(-5/2) + f(-3/2)] and the plug in

Trapezoidal is different because instead of multiplying by delta x, you multiply by delta x/2 and you also have on more term then your number of subintervals.
The formula is : delta x/2 [f(a) + 2f(a + delta x) + 2f(a+ 2 delta x) + ....f(b)]
For this problem: 1/2 [ f(-3) + 2 f(-2) + f( -1)] and then plug in.

Substitution takes the place of the derivative rules for problems such as product rule and quotient rule. The steps to substitution are:
1. Find a derivative inside the interval
2. set u = the non-derivative
3. take the derivative of u
4. substitute back in

e integration:

whatever is raised to the e power will be your u and du will be the derivative of u. For example:

e^2x-1dx
u=2x-1 du=2
rewrite the function as:
1/2{ e^u du, therefore
1/2e^2x-1+C will be the final answer.

related rates:

The steps for related rates are….


1. Pick out all variables
2. Pick out all equations
3. Pick out what you are looking for
4. Sketch a graph and label
5. Create an equation with your variables
6. Take the derivative respecting time
7. Substitute back into the derivative
8. Solve


limits:

Rules for Limits:…
1. if the degree of top equals the degree of bottom, the answer is the top coefficient over bottom coefficient
2. if top degree is bigger than bottom degree, the answer is positive or negative infinity
2. if top degree is less than bottom degree, the answer is 0

To find area between curves:
The formula you use is b(int)a (top eq.) - (bottom eq.).
If a and b is not already given to you, then you much set the equations equal to each other and solve.
You find which equation is top/bottom by graphing both and simply looking to see which one is on top.
If the area is on the y-axis, then the a and b values need to be set as y-values, and the equations must be solved for x.